Sun bed bulbs, like you find in up-market tanning beds, are a big part of the mystery of that perfect tan. You can get any depth of tan you require with the wide variety of lamps available on the market for sun beds. There are several types of bulbs, such as deep-tanning lamps, bronzing bulbs, face lamps and plenty of others too. These high-tech lamps employ the best technology to produce a tan evenly, and above all, safely.
Furthermore, there are different lamps for each type of skin too. The tanning bed industry produces different bulbs for dark to light skin colours. Besides that, you can choose to have a light tan, a golden tan, a bronze tan, or the deepest, darkest tan anyone has ever seen. You can also change the kind of bulb, as your tan deepens, so that you can achieve all kinds of quite stunning results.
A tanning bulb is like having your own source of sunlight in a tube. In fact, it is even better, because you are in control of it! Modern tanning bed bulbs are manufactured to the strictest specifications and so are very safe. The sunbed industry and the government have set strict rules to guarantee your safety. So, if you carefully follow the instructions supplied with the bulbs, you can be sure that you will not be putting your health at risk in order to look like a Hollywood film star.
The UV rays they emit are well within prescribed safety limits to make sure you stay healthy and tanned. Furthermore, there are plenty of choices open to you, ranging from UVB and UVA combinations to pure UVA. It is your choice! So, why not get a little extra tan?
Tanning bulbs are ultraviolet-emitting devices that serve as the main element of the various types of tanning beds and booths. Tanning bed bulbs have as their main purpose the enhancement of a cosmetic tan, although these lamps also have a reputation for the successful treatment of eczema and psoriasis. The depth and colour of tanning depends on the spectrum of light emitted by the tanning bulbs and the vast majority of tanning bulbs produce more ultraviolet light than the sun.
Nearly all tanning lamps use a unit called a ‘ballast’ to regulate their power consumption. The ballast stabilizes the flow of electrical energy inside the lamp and is required to make sure that the bulbs use only the necessary amount of wattage that they require in order to work effectively.
There are various kinds of sunbed lamps on the market including reflector sunbed bulbs and high output bulbs. Most bulbs fall into two main categories: high pressure and low pressure types. (Within the tanning industry, it is usual to refer to high pressure tanning lamps as bulbs and low pressure tanning bulbs as lamps). Both high and low pressure tanning bulbs require a lack of oxygen in its housing.
High pressure tanning bulbs vary in length from three to five inches and operate with 250 to 2,000 watt ballasts, 400 watt high pressure tanning bulbs are the most common. They are often incorporated in the face tanning component of a tanning bed. High pressure tanning bulbs are made of quartz glass and an additional specialized coating, which is necessary to filter out potentially deadly UVC ultraviolet rays.
HP tanning bulbs contain a small amount of mercury or argon and create ultraviolet light in high amounts. The handling of high pressure tanning bulbs should be carried out with a great deal of care and never with naked hands, because even a tiny amount of oil from your hands will cause the bulb to fail prematurely or even break and the resultant spillage of mercury is potentially dangerous. High pressure tanning bulbs ought to be replaced after about 1,000 hours although they will continue to produce light for up to 10,00 hours
Low pressure tanning lamps are very similar to fluorescent tubes, but the glass that makes up low pressure tanning bulbs naturally filters out UVC ultraviolet rays. Low pressure bulbs have a lifespan of six hundred to sixteen hundred hours of use.
Do you want to discover more about tanning bed bulbs? If you do, please go over to our website on tanning bed bulbs Get a totally unique version of this article from our article submission service