PORTERSHREVE.NET

Electrical energy is definitely one of the most important areas of modern-day living. Much of our national infrastructure is dependent upon the abilities and also education among qualified domestic electricians. Characteristically, electricians operate via technical plans when setting up electric installations. They also maintain apparatus plus deal with faulty equipment. The electrical business by and large is accountable for twenty Billion pounds of trade per year within the UK alone. With all the proper certificates, you too could possibly be savouring a successful, in addition to fulfilling, electrician’s career.

In Britain, start looking principally for City & Guilds and also EAL (EMTA Awards Ltd) re-training. Learners learning through their teens usually add work experience coupled with NVQ’s to the C&G (City & Guilds) qualifications. This involves a good three or four year investment of time. Those who are more experienced commonly opt to take faster retraining part-time alongside their present careers. Seeing as most of them are preparing for work in private homes rather than industry, these people don’t require NVQ’s. Professional electrical-related training specialists could get individuals through their training systems and out and about inside of just a few months. This still lets enrolees to fulfill all the official commercial requirements, only inside a narrower field over a potentially shorter timeframe.

Who should get on very well within this kind of occupation? To become an electrician you’ll need to be confident enough to work with a number of tools effectively. Thorough attention with detail is going to be required, to conform to safe practices guidelines. You are going to have to be in a position to perform on your own, and as a consequence make choices on your own. Some electrician work requires a good measure of energy, thus it’s good to become physically in good shape. However,, most critical of all, to work for yourself you will definitely need to be resolute coupled with persistent.

Our stimulus to study to have an electro-mechanical certification oftentimes results via a hope to obtain self-employment. Certainly, it’s fair to claim that just about all mature electrician trainees set off this way. Furthermore, as this demand for electrical jobs around people’s houses continues unchecked, it is highly likely to stay. Lots of students train so they could carry out electrical jobs part-time, in order to result in increased wages. And furthermore, quite a few men or women take on electrician’s classes so as to properly fit a new kitchen in the home as an example.

And likewise with plumbers and builders, domestic electricians are inclined to benefit from numerous great recommendations – if their buyers think they have done a professional job. And so you will be costing yourself money, when you’re not well mannered as well as polite towards all people you work with.

A few domestic electricians utilized by big companies perform shifts, but most work a normal 8 hour working day through the week. Notwithstanding regional changes, the usual workforce domestic electrician in Great Britain in ‘09 earned approx. twenty-six thousand. In comparison, domestic electro-mechanical contractors working for themselves should certainly earn quite a lot more, although they’ll likewise have to put in far more flexible hrs. They have got to take into consideration their running costs though whilst costing for work.

Any schooling would certainly involve distance-learning projects to finish in the home, and your workshops plus examinations in-centre. How speedily you work through the exact training course is usually up to you. You will be fixed for life if you become a licensed electrician – why not get hold of more info on the subject of retraining right now?

Undoubtedly, a great place to begin may be on a training course that prepares you to get a EAL level two Domestic Electrical Installation Technician qualification. You can expect to discover ways to put in electrical systems, re-wire property and also fit residential electrical-related equipment. Seeing that everyone undertaking household electrical-related jobs now has to be ‘Part P’ registered, your training courses may give you an understanding of what is actually recommended. Every single jobbing electrical installer also needs to gain the C&G 2382 17th Edition IEE Cabling Regulations Credential, so study will likely be included for that too. You may also get taught and evaluated to execute various other assignments, that together could mean you can both complete and self-certify household electrician’s labor.

Copyright 2009 Scott Edwards. Go to Electricians Courses or Becoming An Electrician.

It is the use of tides or wind to deliver our daily energy needs that form ‘Green Energy’. ‘Green’ basically means that all the energy is renewable. It’s interesting to note that in some instances we’re actually travelling back in time to utilise some of the older energy skill sets e.g. Wind Power (Windmills etc.) Overall, this is the method of using modern techniques to provide eco-effiency and planet friendly options.

In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. For electricity created through roof-installed panels, you would need Photovoltaic Panels or PV’s. Equally important is that of Biomass Energy – which includes Stoves, Fuel, Pellets and Boilers burning Wood. Then we have the ancient energy of the Sun and the heat that comes from it – now called Ground Source Heat Pumps. Finally, we have two of the most traditional forms of energy generation that have gone through some resurgence over the last few years; these being Wind Power, Wind Turbines and Hydropower (including Water Wheels.)

Solar Thermal Energy – By using different technologies, Solar Energy is effectively made up of two types of solar panels. Initially, there is the process of obtaining hot water from the Sun via Solar Water Heating Collectors. Additionally, there is the method of converting solar radiation into electricity known as Photovoltaic – or simply Solar Electrical panels. To get the best results these panels need to be south facing at an angle of around 30 degrees from horizontal, and away from blockages.

With Solar Power being so common within the UK, it’s Solar Water Power that is most often used. Solar Water heating systems can meet the need for more than half of all hot water needs in the domestic market. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.

Biomass Energy: This is a ‘capture all’ phrase which includes all natural materials. e.g. Wood, straw and poultry litter – but nowadays also includes modern ‘Energy Crops’. It is by using these materials in new ways to create energy that makes it so exciting. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. One of the main factors of this style of energy is the result without the impact on C02. To that end, many wood crops come from sustainable sources (as one tree is felled, another is planted in its place; thus the new tree absorbs the CO2 produced during the heating process.)

Within this field is the need for the use of ‘Energy Crops’, such as fast growing trees, e.g. Willow and Poplar or other entities grown on a Short Rotation Coppice (SRC). Of equal importance is the ability to produce dry matter – and perennial grasses are very good for this. Of equal importance, although maybe less well known, are Municipal and Agricultural Waste. As a by-product, Agricultural Waste is simply part of the farming process. Of equal importance is Municipal Waste, which comes from recycyled wood and food.

Geo-Thermal Energy Based Systems – By naturally heating the Earth, the Sun has the potential to generate both warm water and electricity. Within the UK, the constant ground source heat temperature is around 12 degrees centigrade – and can be utilised to both heat and cool buildings. Heat pumps are recognised as a very good form of power generation, generally giving back four units of energy for every one used. By using energy from solar electrical panels or wind turbines to power them, heat source pumps can be almost 100 percent renewable in energy production.

Wind Energy – An Update On Old Technology: The use of wind as a source of energy has been going on for thousands of years, especially in milling grain and pumping water. More recently, there has been the desire to deliver the energy created to the home – or to a local power grid. With regard to wind generation, it is the UK that has the highest production within Europe. Although we only utilise 1 percent of the current electricity capability from wind – we do have the ability to create 10 percent. Frankly, electricity can be realised from as little as 2p per kWh – as opposed to the current level of 2-10 p per kWh. The financial recovery process takes around 6-9 months.

Within the UK, Hydropower suits the energy generation model. Just like a thousand years ago, we are utilising the energy from water. That aside, it is fair to say that some 2 percent of the UK’s electrical load could come from this source.

A hydropower system uses a turbine to create energy from moving water. By using a dam or a natural river drop, these turbines do not require water storage. A ‘Micro-Hydro’ system creates energy through the use of dams and sluices (that are no longer a part of the national distribution system.) Although a lesser known form of electricity output, this process could supply 200mW of UK demand. When considering the installation cost of items such as this, we’re looking at somewhere between 200 pounds and 3k per kW of energy created.

The demand on ‘Green Energy’ continues to develop – in light of the energy demands worldwide. The UK remains one of the main beneficiaries of this technology.

With the rise in demand for domestic installations, both Electricians and Plumbers are well placed to take advantage of this technology. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. It is important to gain the correct qualifications to install these items. Electrical or plumbing training that incorporates green technology could be very useful for the future.

Written by Scott Edwards. Visit Renewable Energy Certification or www.electricianqualification.co.uk/Green-Engineer-Certification.html.

Lots of people choose a career within the electrical industry because it both appeals and motivates them. Although often assigned to as ‘Electro-Mechanical Engineering”, we will simply refer to this as the Electrical Industry. As there are a wide variety of global standards, we will focus on those from the UK and in particular those relating to the domestic and commercial markets. We will begin by reviewing the main issues first and come back to the ‘add-ons’ later, because of the huge number of options available as a career within this subject.

Essentially, we see two distinct forms of entry into the electrical market. The primary route is the apprenticeship which is considered the more traditional and then we have the second phase for those who are joining at a later stage. For the sake of clarity throughout, the first will be known as ‘Junior Entrants’ and the second simply known as ‘Mature Entrants.’

Many Mature Entrants enter the market so they don’t have to rely on others, especially when they can work on their own building ideas and not have to pay for anyone else to help them. However, people who join as junior entrants like the fact that they can join a recognised firm to pick up the bulk of their practical and work based skills. Upon leaving school many apprenticeships provide a fast learning curve for young adults looking to boost their auxiliary skills.

Entry has two separate approaches to teaching. Junior Entrants are heavily linked with NVQ’s (or the Scottish equivalent – SVQ’s.) Whilst the core syllabus is relatively similar to non-NVQ commercial training, there is a particular requirement to attain the actual NVQ qualifications as part of the overall training program. ‘Junior Entrants’ will have to be in an apprenticeship of some sort in order to achieve the testing and course work required.

By opting to work on a freelance basis, many Mature Entrants appear to focus on those areas that provide profitable and practical solutions other than NVQ’s. Having said that, the mature student does aim to gain the necessary skills to do the job, whilst at the same time reducing their training costs at all times. Although this may offer quicker and more commercial options, it does reduce the official requirements set for certain areas of the industry.

Between self-employment and general employment we have two routes to consider in terms of typical income. With self-employment a person may be working on a part-time or full time basis -to that end we will assume they are working full time. The aptitude and talent for getting things done can affect the levels of salary as well as any experience or knowledge gained.

‘Junior Entrants’ can expect a basic salary of 12K at the beginning of their training. With application and experience this figure often more than doubles in time. ‘Mature Entrants’ salaries though are often more difficult to work out, but can rise to 70.000 and above as reported in UK newspapers. Regardless of all that is the need to cover off additional costs such as tools, clothes and even a vehicle and all that goes along with that. Furthermore, professional items such as accountancy, tax and insurance need to be considered to make the business work properly. Whilst there is lots of available work, a severe skills shortage means electricians are very much in demand. If a student wanted to work every day of the week this would be possible in some areas. To be fair, high salaries bounded about by the press do require long working hours or help to achieve them.

To be fair, most Junior and Mature electricians experience very different working hours to each other. Most of the work for Junior Entrant electricians will be on a simple 9-5, Monday to Friday basis. Whereas the Mature market can be more dependent on the domestic market for some – i.e. weekend and evening work, when their clients are available and back from work. And yet, a huge number of self-employed electricians operate during the main part of the working week by focusing on office and small business systems.

Once a career in electrical work has been chosen, a Junior Electrician is often at the mercy of their employer when it comes to learning new skills and expertise. Whereas the mature entrant can gain knowledge from any trade source – even one outside of the core of electrical work. Without a doubt the extra skills help them in their overall employ whether this is commercial or domestic work.

A new trade example is that of the ‘Green Engineer’. This new service to the industry could fit into the overall skill-set of an electrician. The curiosity of both Junior and Mature Electricians to this new industry is well founded especially when considering the power of the UK and the EEC markets in areas of growth and governmental projects.

Copyright 2009 Scott Edwards. Pop over to electricaltrainingcoursesgb.co.uk or Electrician Courses.

Basically the ideas is how ‘Green Energy’ meets our everyday needs supplied by natural resources such as wind, tides and even geothermal heat. ‘Green’ basically means that all the energy is renewable. It is easy to think of the fact that we are often travelling back in time, especially when we think of items such as wind power and windmills. Overall, this is the method of using modern techniques to provide areas such as eco-effiency and planet friendly options.

It is the use of simple renewable energies such as Solar Thermal and Solar Water Heating Collectors that suits the home environment. Following on it is items such as the Photovoltaic Panels (PV’s) that develop electricity through suitable roof-panels. Equally important is that of Biomass Energy which includes Stoves, Fuel, Pellets and Boilers burning Wood. There is the old heat from the Sun now known as Ground Source Heat Pumps. Considering items such as Wind Power and Hydro Turbines we are finally getting to very old forms of energy production.

For those wanting to train in this area we will expand on each section and cover off some of the skills required. Working in the field of Plumbing, Gas or as an Electrician you can see that the points raised would be of value to you. It would definitely be worth looking at modern careers such as Electricians, Plumbers and Green engineers and see how they relate to this information. So we have researched this site and added links and adverts for interested parties and bookmark via CTRL-D.

Thermal Solar Energy – This technology is based around two core types of knowledge to achieve the results known as Solar Energy. At a first strategy we have Solar Water Heating Collectors which basically creates hot water from solar energy. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels which transform solar radiation into electricity. Obviously situated away from blockages such as chimneys these Solar Panels basically need to be mounted on south facing roofs at an angle of 30 degrees from the horizontal.

With Solar Power being so common within the UK it is now Solar Water Power that often comes to mind. With the ability to provide almost half the annual need for hot water in the house then Solar Water heating systems is very important. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.

Systems Utilising Biomass Energy: This is a general term for all forms of plant and animal material e.g. wood, straw, poultry litter and ‘energy crops’. It’s the ability of this power source to generate diverse forms of energy such as heat and electricity that makes this so adaptable. With one of the largest production legacies within Europe, the UK is a main player in Biomass produced electricity in the area. It should be borne in mind that the whole process is designed to produce energy without an impact on CO2. With each tree being planted as another is felled you can see how the C02 produced during heating is minimised and why the system is deemed sustainable.

‘Energy Crops’ such as Willow and Poplar play a major part in the process under the banner of Short Rotation Coppice (SRC). Also producing high yields of dry matter are perennial grasses. Municipal and Agricultural waste products are both little known but essential materials to this field. Agricultural Waste is commonly formed as a by-product of traditional work in agriculture. Of equal importance is Municipal Waste, which comes from wood and food.

Geo-Thermal Energy Based Systems – This is where both warm water and electricity can be produced as by products of the natural heating of the Earth by the Sun. Using the ground temperature of around 12 degrees in the UK we can both heat and cool buildings. With four units replaced for every one unit of energy used these heat pumps are very effective. The energy generated by a heat source pump can in fact be considered 100 percent renewable, if the power to operate the pump comes from solar electrical panels or a wind turbine.

Wind Energy Based Systems – As an energy source wind energy has to be one of the oldest forms of energy creation in history. That aside the ability to generate energy and transfer this onto homes or the local grid has been a relatively new option. The UK alone is considered one of the best sources of wind generation within Europe. Although, within the UK we currently only utilise 1 percent of electricity from wind, yet the potential rests at a surprising 10 percent. Rather than electricity production running at 2-10 p per kWh it could be run at 2p per kWh. It is from this that the recovery process takes around 6-9 months.

Then there is Hydropower – something within Europe that the UK excels in. Having said that the art of using energy from moving water, as like wind power is very traditional. In total, this could result in something like 2 percent of all electricity produced in the UK.

A hydropower system transforms the kinetic energy of the moving water into another type of energy by means of a turbine. The important thing is that without relying on water storage the turbines can generate electricity. A ‘Micro-Hydro’ system creates energy through the use of dams and sluices that are not considered in the larger national distribution schemes. This process alone could meet 200mW of the UK requirement. When considering the install cost of items such as this it is worthwhile to think about the return which rests somewhere between 200 pounds and 3k per kW of energy created.

It can be seen that the route to ‘Green Energy’ is growing considerably, especially in light of the need for increasing energy outputs throughout the Western World. Within the UK and mainly the domestic sector we are well placed to take advantage of the schemes listed above.

It is the drive for installations in the domestic sector that looks to favour jobs such as plumbers and electricians. With ‘Green Energy’ rising up the political agenda in Europe a range of financial aids and grants is becoming available. Getting the right qualifications can often provide job security in a new field such as this. Training such as electrical or plumbing that incorporates green technology would be very useful for the future.

Copyright 2009 S. Edwards. Pop to Green Engineer Training or Green Engineer Courses.

Due to the exciting choices available, the electrical industry offers jobs that many people choose. For simplicity’s sake we will use the phrase Electrical Industry to cover off the more accurate term of “Electro-Mechanical Engineering”. Also, due to a wide variety of qualifications and standards throughout the world, we’ll focus on those that fit the UK domestic and commercial market. As this is such a wide ranging subject matter we’ll begin by sticking to the main area first and come back to the ‘add-ons’ later.

Essentially, we see two distinct forms of entry into the electrical market. Initially there’s the more traditional apprenticeship approach, but equally there is now an alternative, suited to those who are keen to enter later in their life. There are two sets of people for consideration firstly the ‘Junior Entrants’ and secondly the ‘Mature Entrants’.

Mature Entrants who join the industry later on do so with the aim of working for themselves, usually as a one person business. Alternatively, ‘Junior Entrants’ will pick up lots of their work place skills by working with an already reputable electrical company. Upon leaving school many apprenticeships provide a fast learning curve for young adults looking to boost their auxiliary skills.

Clearly these two options have both differing training styles and methods of entry. The Junior Entrants syllabus involves NVQ/SVQ’s as well as proving working skills. An NVQ qualification would need to be obtained as part of the training program. New employees gain the necessary course work and testing elements through an apprenticeship or some form of suitable work program.

Mature Entrants do not appear to seek the NVQ element but instead they go after the most commercially suitable qualifications. For example by concentrating on those qualifications aimed at giving them the best return from their training costs. Although this may offer quicker and more commercial options, it does reduce the official requirements set for certain areas of the industry.

Salaries are often simply broken down to those that relate to self -employed people and those in general employment. Whilst self-employed people can choose the hours that they work, we assume that they are working full time for the purpose of this review. It is recognised that competence and qualifications add to income levels as well as experience and information gained.

‘Junior Entrants’ can expect a basic salary of 12K at the beginning of their training. With application and experience this figure often more than doubles in time. That said, due to the UK press telling people that electricians can get salaries in excess of 70k p.a., it is more difficult to gauge incomes for ‘Mature Entrants’. That aside, many added costs need to be remembered by self employed people in order to make their business work. Allocations for personal/professional insurance will also have to be catered for. Aside from that, the current skills shortage within the UK still means that there’s lots of high value work out there. Certainly, working a full week is a realistic possibility for those who want to. Whilst figures of seventy to a hundred thousand are often bandied around in the press, they do not often inform you of the long hours you would need to work to achieve this.

To be fair, most Junior and Mature electricians experience very different working hours to each other. ‘Junior Entrants’ would normally be required to work Monday-Friday 9am-5pm. That aside the Mature market is equally affected by when their clients are available – this is especially so within the domestic sector, where evening and weekend work predominates. Although by testing and installing various business systems, many self-employed electricians manage to work during a normal working week.

To be fair it’s often the boss of a company who states the type of specialist knowledge that Junior Entrants gain whilst in their employ. Whereas the mature entrant can gain knowledge from any trade source – even one outside of the core of electrical work. Within the domestic market this allows them to work under a range of headings without having to rely upon sub contract suppliers.

One fresh approach is that of the ‘Green Engineer’. This could be an area of interest to both Junior and Mature Entrants, and with the expected growth and governmental (both UK & EEC) support, it could provide some highly lucrative employment and business opportunities.

Author: Scott Edwards. Browse around An Electrical Course or INeedANewCareer.co.uk/GINANC.html.

To begin with newspapers appear to love discussing what can be earned in Plumbing. Salaries of 30-70k p.a. are often discussed, along with the lack of plumbers within the UK. Is this really a fib – or is this in fact accurate? Without a doubt, a fully experienced Plumber can command salaries of such levels. So whilst those working in the self-employed role can get incomes of 70-100k p.a., those working in more conventional employment routes often find it hard to achieve this salary.

The normal working week is pretty standard for those who join an established company. Normal remuneration such as holiday pay and sickness allowance, along with wages of between 15k and 30K p.a., are usual from UK companies in this area. That said it is by working longer than typically 9am to 6pm, Mon to Fri that self employed people achieve higher incomes than those adopting a traditional approach. For example in the domestic sector where clients are often at work during the working day, self employed plumbers are regularly required to work during evening and weekend visits.

Then there is the matter of working for yourself, which agrees with some people more than others. The inclusion of key elements such as utilising good ‘business sense’, covering areas such as advertising and marketing and getting your own cost-per-hour correct is integral to the picture. There are additional charges levied to people who work for themselves including legal and accountancy fees as well as those relating to materials and transport. Whilst it is expected that the benefits will be high, the costs can mount up though they should always remain a small part of the income overall. And the downsides are nearly always outweighed by the proceeds!

Initially, by searching for standard work a Student Entrant can get the majority of training especially with working knowledge and experience. As quickly as possible the Self Employed Entrant needs to increase their list of accreditations that they will rely upon. To be fair it is the ‘domestic’ market which appeals to a large number of self-employed plumbers and not necessarily that of the commercial sector. (The majority do at the very least)

In terms of plumbing education, there appears to be some similarity between the certification modules required by each path into the industry. A key debate however comes into play when considering the issue of NVQ’s (SVQ’s in Scotland.)

At first, the Student Entrant does appear to depend much more on the NVQ structure than the Self Employed Entrant. Therefore many Self Employed Entrants will meet their clients’ needs through the use of a wider range of certifications. Certainly, it is the qualifications aimed at meeting the needs of the typical household-based client base that self-employed persons need to focus upon. It is within the workplace – where the NVQ element can be appraised that many Student Entrants carry on with their apprenticeship after having covered the key fundamentals through a college scheme. The Student Entrant can also make financial savings at the start, as it is a cheaper form of study overall. However, in relation to the Student Entrant the Self Employed Entrant will gain certifications faster and therefore achieve substantial financial gains in the long term.

This shows the necessity of a clear careers discussion, covering the overall study and certification requirements alongside the required financial return. It is often the issue of 3 years in low-paid apprenticeship work, alongside going back to college that many adults having to look after their family and with say 20kp.a requirements find difficult. Furthermore, many Student Entrants have their studies paid for them whereas the self-employed students fund the variety of course themselves. It is often the course structure and the level of certification that can run into costs of around 3k-10k+.

For the most part the private colleges are the domain of the Self Employed Entrant whereas the Student Entrant is required to study at recognised further-education colleges. Certain plumbing training companies deliver the accepted skill-sets and qualifications providing the basis for education. In the current climate the ability of Self Employed Entrants to maintain their current financial situation and job, whilst at the same time as training in the evening, part-time or on self study classes remains one of the advantages of this system. Using the range of sources, it makes sense to gather as much detail as possible and through this be able to work out the training college that suits you best. We have provided adverts and links from several to allow you to come back and review your options, so why not book mark this page (CTRL-D).

Many plumbing students will go on to consider additional courses to increase their ‘marketability’. Key certificates in areas such as Gas, Green Energy and Electrical training can be provided by these courses. As part of the commercial and domestic heating procedures, Gas training continues to be popular with Plumbers.

Gas Training, with subjects followed by a focus on NVQ’s is recognised as an accurate and exact training program. For those who trained as a plumber first and are now looking at extra skills this also offers many options for their on-going development. It could be said, from that viewpoint, that a hybrid of Plumbing/Gas training would be more suited to the mature student. Indeed, the path for the Mature Student seems to be to drop the NVQ elements and to focus on the core subjects.

From this, the self-employed professional appears to suit the variable training schemes. To earn money whilst at the same time as gaining a wider range of perceived skills becomes a desirable prospect. This further enhances their commercial offering, instead of sub-contracting key skills to a third party. Having to wait for critical phases to be completed by sub-contractors can not only reduce the earning potential of each job but can also negatively affect a customer’s perception of a job value overall. To have a higher value within their client base a Plumber needs to consider their relative skill sets that they offer.

In consideration therefore the Self Employed Entrant has the chance to earn considerably more and at a realistically higher pace than the Student Entrants, to do so they do have to develop both the range of certifications that they hold and consider the business elements as well. Note: This information relates to the UK market, policies and industry requirements alone.

Written by Scott Edwards. Go to Plumbing Training Courses or Click HERE.

Due to the exciting choices available, the electrical industry offers jobs that many people choose. Although often assigned to as ‘Electro-Mechanical Engineering”, we will simply refer to this as the Electrical Industry. In addition, we will stay with the UK market and especially items relating to the domestic and commercial sectors rather than global issues. By starting on the main subjects and checking the ‘add-ons’ later on we can review the centre of the electrical industry.

Really there are two main ways to enter the electrical market. Along with apprenticeships for school leavers, students entering the field at a later phase in their life now have an alternative to more traditional amateur routes. To begin with we have the ‘Junior Entrants’ and then we have the ‘Mature Entrants’.

Many Mature Entrants enter the market so they don’t have to rely on others, especially when they can work on their own building ideas and not have to pay for anyone else to help them. On the other hand, to gain further credentials and experience ‘Junior Entrants’ tend to work for a recognised electrical firm. Upon leaving school many apprenticeships provide a fast learning curve for young adults looking to boost their auxiliary skills.

These two distinct types of entry have two separate modes of training: Junior Entrants are heavily linked with NVQ’s (or the Scottish equivalent – SVQ’s.) There is a particular requirement to attain the NVQ qualifications as part of the overall program. This means that work programs or apprenticeships have to be sought in order to arrange the necessary course work and testing phases of work.

By opting to work on a freelance basis, many Mature Entrants appear to focus on those areas that provide profitable and practical solutions other than NVQ’s. Such as obtaining documentation that gives them the best chance to gain from their training endeavours and thereby the best financial rewards. This system, although appearing to reduce the attributes laid out, does allow for a faster and more solid entry into the domestic market.

Salaries are often simply broken down to those that relate to self -employed people and those in general employment. Whilst self-employed people can choose the hours that they work, we assume that they are working full time for the purpose of this review. It is recognised that competence and qualifications add to income levels as well as experience and information gained.

The basic salary for Junior Entrants tends to start around the 12-15k mark, but rises regularly to around 30k with the right level of experience. That said, due to the UK press telling people that electricians can get salaries in excess of 70k p.a., it is more difficult to gauge incomes for ‘Mature Entrants’. Regardless of all that is the need to cover off additional costs such as tools, clothes and even a vehicle and all that goes along with that. In addition to this they will also have to allow for items such as accountancy and personal/professional insurance. Whilst there is lots of available work, a severe skills shortage means electricians are very much in demand. Working 7 days a week is totally achievable for most people if they want it. It should be noted that figures of 70-100k p.a. advertised are not necessarily easy to come by and would require some long working hours to obtain them.

It should be noted that the working week for most electricians differs between the Junior and Mature Entrant markets. For a ‘Junior Entrant’, most work is on a simple working week basis. The Mature market is however often reliant as to when their client base is available, especially in the domestic sector. Although by testing and installing various business systems, many self-employed electricians manage to work during a normal working week.

A Junior Entrant that has chosen to adopt a career within the electrical trade is more than likely to gain follow up expertise within the particular field they fall into, often dictated by the main business activities of their employer. Then again, the mature entrant can even go outside of the electrical field to gas work or plumbing work for example. If they are working mostly in the domestic market, this makes it easier for them to take on larger jobs across a range of disciplines (without having to sub-contract.)

One new, fast growing area – one that invokes a wide array of skills sets and is new to the industry overall – is that of the ‘Green Engineer’. This could be an area of interest to both Junior and Mature Entrants, and with the expected growth and governmental (both UK & EEC) support, it could provide some highly lucrative employment and business opportunities.

Written by Scott Edwards. Visit Electrical NVQs or www.CareerChangeOptions.co.uk/gcco.html.